Tag: REVERB DELAY
-
Example Prologue Decay of a IR Reverb Without Stretching it
1) Insert Delay Before Convolution Reverb 2) Set Delay to 1/4 Trip 3) Play with Feedback / Mix etc. as Desired
-
Example Delay After or Before Reverb
1) Add a Delay After the Reverb a) Left = 1/8 Trip and Right ) 1/4 Trip b) Add Diffusion so the Repetitions are Not Too Clear c) Automate Wet/Dry Over Time to Suit the Vocal Parts, or Make a Distinct Wet Line and Automate Level of Delay Line Only
-
Example Reverb on Guitar and Put it Behind Singer
1) Simply Reduce Pre Delay so the Guitar Part is Almost in the Room 2) Also Reduce High Frequencies of Reverb to Simulate a Further Away Guitar 3) Also Think About Putting the Guitar Reverb Opposite of the Guitar Itself and Use Reverb in Mono 4) Add the Same Delay as Vocal After the Reverb
-
Add Delay to Rap Vocals
1) Very Short Delay (Slap Delay) with Little Send Volume to Fatten Up Lead Vocals and Make Them a Bit More Stereo Sounding – Generally from 40ms to Max 80ms (Around 1/16 but Not Synced) 2) Throw Delay Echo, i.e. Echo on Certain Words or on AdLibs – Typically Roland Echo Space in 1/4 or…
-
Create ER and Tail Sends
General – Create Separate Early Reflections and Separate Tails – Basically a Near ER, Middle ER and Far (Rear) ER via Pre Delay – Pre Delay is Quasi the Time in between eh Initial Sound and the Start of the Delay (i.e. Early Reflections of the Delay) – Notice that ER Reverb Unit should be…