Yendo Starritz

All About Music Production

Tag: EDM

  • Example Setup a Kick with Bass (EDM)

    Yendo Starritz
    in

    1) Match Up Tones/Root/Key 2) Check Decay of Kick, How Long the Kick is 3) Check Decay and Release Time of Bass, How Long the Bass Sound is and How Long it Takes to Fade Out 3) EQ Boost with Narrow Peak the Bass where the “Boom” Character is – Manage Tail of Subs Beside…

  • EDM Louder Master Tip

    Yendo Starritz
    in

    1) Use a Dynamic EQ at Around 20Hz with a Low Shelf that Dynamically Reduces Low End when there is Too Much 2) Use a Dynamic EQ at Around 12kHz with a Peak that Dynamically Reduces Harsh Top End when there is Too Much 3) Reduce Transient Information on Drum Buss and 2 Buss by…

  • EDM Standard Levels Mix

    Yendo Starritz
    in

    Bass = Peaking at -10dBFS Vocals = Peaking at -8dBFS Pads = Peaking at -10dBFS Drum Buss = Peaking at -8dBFS 1) API 2500 Comp, Max -4dB GR / Slowest Attack / 4:1 / Fastest Release / Hard Knee / Feed F (Modern) / Fully Linked / Mix 30% 2) Tape, 15iPs / GPS Tape…

  • Compression Dance Master Settings (or Mix Advice)

    Yendo Starritz
    in

    1) Rapid Compressor to Catch Peaks – i.e. a More Colorful but Fast Compressor that Distorts the Peaks Nicely 2)  Transparent and Clean Compressor to Shape the Body – i.e. Feedback Type or also SSL Buss Comp 3) Both Compressors with Gentle Settings Such as -1dB to-2dB GR and Ratio

  • David Guetta Ideas

    Yendo Starritz
    in

    – Uses Always 1 Low Kick (Bass Feeling) and 1 High Kick (EQ to Attack) – Advises One to Use a Kick that Works Over and Over in the Beginning (Uses the Same Over 2 Years) – Next Level is to Use Always the Same High Kick and Tune the Low Kick to the Key…

  • EQ Settings Dance Master (or Mix Advice)

    Yendo Starritz
    in

    1) Analyzer with Average / RMS Reading and Slow Update (Not a Moment to Moment Peak Display) – i.e. a Spectrum Analyzer that Clearly Sticks to an Overall Spectrum Envelope with a Rather Slow Update Over Time 2) Clean EQ (Nugen SEQ) to Balance Spectrum from Roughly 100Hz to About 5kHz 3) Now you Should…

  • Balance Kick and Bass

    Yendo Starritz
    in

    Version 1 Panning 1) Pan All Kicks to -2 2) Pan All Basses +2 Version 2 Counter EQ 1) LC Kick to 22Hz at 12dB with Q of 1, HP Kick to 6330Hz at 12dB with Q of 1 2) Route Kicks to a Group and Dip with Clean EQ at 51Hz -2dB to -3dB…