Separation
- First Create Separation
1) Insert EQ on the Master Out
– High Shelf Boost 2dB from 1080Hz with Q 24, Bell Boost at 288Hz by 2dB with Q 0.7, Bell Dip at 45Hz by 1dB with Q 0.7
2) Insert Dynamic Tool on the Master Out to Enhance Mids
3) Widen Kick with Ozone Imager “TFX Kick Wider EDM”
4) Ozone Impact on Kick “TFX Punch Sub Transients”
5) Widen Bass with Ozone Imager “TFX Bass Wider EDM”
6) Saturate Bass with Ozone Exciter “TFX Saturate Bass EDM”
7) Boost Highs of Bongo Loop with Ozone Imager “TFX Boost Bongo High EDM”
Glue
- After Separation, Glue Things Together
1) Ozone Stabiliser on the Master Out, “TFX EDM Transient Glue Master”
2) Ozone Spectral Shaper on the Master Out to Glue Subs, “TFX EDM Spectral Glue”
3) Ozone Impact on the Master Out to Expand Lower Mids, “TFX Glue EDM Lower Mids”
4) Ozone Low End Focus to Smooth Low End, “TFX EDM Smooth Out Low End”
5) Ozone Maximizer as Upward Compressor, “TFX EDM Upward Comp”
6) Ozone Vintage Limiter for Glue Only, “TFX EDM Glue”
Movement
- After Separation and Glue, it is Time for Movement
1) Automation, e.g. Drop Level on Mix Buss Just Before Drop by -1.1 dB
2) Pan Percussion on Certain Spots from 1 Side to the Other
3) FX Plugins Like Arturia Motion EFX or Refract EFX, Up Riser or Down Riser
Leave a Reply