Category: Mastering Tips
-
EDM Mastering Levels
General Workflow 1) Start to Master the Loudest Possible Version by Taking your Loudest Song Part and Work Out the Master Over that Level 2) Then Aim for the Dynamic Version by Reducing 2 dB of RMS and Peak from the Loud Master 3) Then Start to Prioritise if it is Going to Radio, Stream…
-
Deep House Mastering Chain Order
1) Digital EQ 2) Glue Comp 3) Multiband Comp 4) Saturation 5) Parallel Comp
-
Mastering Workflow
General Workflow Preview Clean Up 1) Remove Resonances with Dynamic and / or Static EQs 2) Balance Dynamic with Multi-Band Compressors 3) De-Ess and HF Limiter 4) Check Bass Mono Compatibility 5) Reduce on Demand the Bass and / or Highs with a Lo-Shelf / Hi-Shelf, or an EQ with a Broad Q 6)…
-
EDM Louder Master Tip
1) Use a Dynamic EQ at Around 20Hz with a Low Shelf that Dynamically Reduces Low End when there is Too Much 2) Use a Dynamic EQ at Around 12kHz with a Peak that Dynamically Reduces Harsh Top End when there is Too Much 3) Reduce Transient Information on Drum Buss and 2 Buss by…
-
Goodhertz Mastering Chain
1) Mono Side Below 125Hz 2) Equalizer / Tone Control (Linear Phase), HP 30Hz or Lower 3) Vulf Compression (2 Buss Glue Parallel Preset) 4) Tape (2 Track HI) / Wow Control (Analog Only Preset 15ips) 5) Saturation (5751 = Neutral, 6L6 = More Low End, EL34 = Exciter, 12AX7 = Gritty Crunch) 6) Mid…