– this Setup is to Send Hard Panned Tracks or any Sound that has more Signal on either of the Sides to the Other Side to Equal the L/R Power (to have just a little bit of Echo on the other Side)
– Put 2 different Slap Delays with one Panned Hard Left with a Setting of 155ms & the other Slap Delay is Panned Hard Right with 145ms – for Tempo 100Bpm would normally be 150ms but the Trick is to have 1 5ms over and the other 5ms under
– if the Gap is too Wide divide by 2 = 75ms (instead cycle around 150ms for 100 Bpm you cycle around 75ms)
– both have a Filter Cut to remove Rumble and High Freq Mess
Leave a Reply