Split Bass Before Setup Kick vs Bass

1) Split the Original Bass into 2, a Sub Bass Part and a Bass Part

– i.e. EQ High Frequency Bass with a 24dB Low Cut at 80Hz (Q at 1 or Default) 

– then a 24dB High Cut EQ for the Low Frequency Set to 100Hz (Not 80Hz) with a Q at Around 0.500

– Keep the Original Bass in the Project to Compare if the Sound is Still Identical, if Not Adjust the EQ Cut Frequency and Q

2) Insert a Shaping Tool Such as LFO Tool or Duck onto the Sub Bass Part and Draw In Space for the Kick

3) Now you can also Mono the Sub Bass Part whilst Spreading the Bass Part a a Bit