General
– Measures the Stereo Field and Shows it on X and Y Axis
– the 2 Lines Left & Right are at 45% and Define the “Safe Area”, i.e. as Long as the “Dots” Fill only this Area the Material is a “Safe In” Phase Stereo Signal
The Polar S
– Mode plots Dots per Sample
– a History by Fade Out Slowly is Shown
The Polar L
– Mode Shows in Length the Level of Stereo and the Angle the Position within the Stereo Image
– also a History by Fade Out Slowly is Shown
Lissajous
– Simply Shows the Same but with Less Info
Peak Detection Mode
– Responding to Peaks from a Stereo Signal
RMS Detection Mode
– Average Indication from a Stereo Signal (same as a VU Meter)
Envelope
– Detects Even Levels of all Frequencies
Balance Meter
– Shows the Fluctuations of a Stereo Field with the Dimmed Line, i.e. Panning of Signal
Correlation Meter
– measures Correlation of the Right Hand Channel and the Left Hand Channel
– as Long as the Meter Stays in the Area of +1 All is In Phase
– when Mono, there is a Complete Correlation
Leave a Reply